Gateway E-6100 Benutzerhandbuch
105
Adding or replacing add-in cards
www.gateway.com
5
If you are replacing an add-in card, remove the old add-in card. You can
slightly seesaw the card end-to-end to loosen the card, but do not bend
the card sideways.
slightly seesaw the card end-to-end to loosen the card, but do not bend
the card sideways.
6
Insert the new card into the add-in slot.
You can slightly seesaw the card end-to-end to help insert the card, but
do not bend the card sideways.
do not bend the card sideways.
7
Push the add-in card retention cover inward, then secure the add-in card
retention cover with the retention thumb-screw.
retention cover with the retention thumb-screw.
Warning
Do not touch the contacts on the bottom part of the add-in
card. Touching the contacts can cause electrostatic
damage to the card.
card. Touching the contacts can cause electrostatic
damage to the card.