Bixolon SRP-270 Benutzerhandbuch
![Bixolon](https://files.manualsbrain.com/attachments/45536b001a9d6ef2594b329d44216747cf7f199a/common/fit/150/50/7b52bef79f7a851ef11fe5538a8f4f6970f1ecb7e838f429ff2fa754417e/brand_logo.png)
Rev. 3.02
- 80 -
SRP-270
8-8-2-3 Base Paper Feed Assy - #3
Name of Parts
Method and Procedure
①
SUB PCB ASSY
②
SCREW TAPPING (M2*3, 2EA)
③
MANUAL CUTTER
④
SCREW (M3*6, 2EA)
⑤
PLATEN PAPER GUIDE
⑥
SHAFT HOLE ROLLER
⑦
HOLE ROLLER (2EA)
⑧
SPRING HOLD ROLLER (2EA)
1. Set SUB PCB ASSY to fit the hole in the bottom face of
①
BASE PAPER FEED and tighten two SCREW TAPPING.
②
2. Set the MANUAL CUTTER to the boss on the BASE
③
PAPER FEED and tighten two SCREW.
④
3. Hook PLATEN PAPER GUIDE on the manual cutter in the
⑤
front face of BASE PAPER FEED.
4. Grease section of SHAFT HOLE ROLLER mounted HOLE
⑥
ROLLER and insert two HOLE ROLLER
⑦
. Next, set SHAFT
to the each groove of BASE PAPER FEED as fitting HOLD
ROLLER into PPG.
ROLLER into PPG.
5. Hook two SPRING HOLD ROLLER
⑧
on the both side of
BASE PAPER FEED.
<Check Point>
Check the location of PLATEN PAPER GUIDE, status of
Check the location of PLATEN PAPER GUIDE, status of
hooking, coming off.