Epson 286 PLUS Benutzerhandbuch

7.

Lift the entire subassembly out of the computer and carefully
place it on your work surface.

Your computer comes with 

1MB 

of memory which is soldered

directly onto the main system board. By installing SIMMs

(single inline memory modules), you can increase the amount of

memory in your computer up to 5MB. (You can add a memory

card, however, if you want to expand your computer’s memory

up to 16MB.)

Caution

It is best to have your dealer install memory modules for you

because they can be damaged easily if installed incorrectly.

If you prefer, you can install them yourself by carefully

following the instructions in this section. However, you could

transmit an electrostatic discharge and damage your
components; so read this entire section before you begin.

Before you install SIMMs, check the following guidelines to

ensure that they will work properly:

Use SIMMs that operate at 100ns (nanosecond) or faster

access speed. Be sure all the SIMMs operate at the same

speed.

Use the correct SIMM configuration to add the amount of
memory you want. See the table on the next page.

Once you have the SIMMs you need, you or your dealer can

install them in your computer. If you are going to install them

yourself, follow the instructions in this section.

5-22

Installing and Removing Options