Epson 468C Benutzerhandbuch

Follow these steps to connect your VGA monitor to the

computer’s built-in VGA port:

1. Place the monitor and computer so the backs are facing you.

2. There should be two cables provided with your monitor: the

monitor cable (to connect it to the computer) and the power

cable (to connect it to a power source). On most monitors,

the monitor cable is permanently attached to the monitor,

as shown in the following illustration. If your monitor does

not have an attached cable, connect the cable to it now. (See

your monitor manual for instructions.)

3. Align the connector on the monitor cable with the VIDEO port

on the computer; then insert the connector. Be careful not to

bend the pins when inserting it.