Epson 468C Benutzerhandbuch

To avoid generating static electricity and damaging the

memory chips, ground yourself by touching the metal

surface on the inside of the computer’s back panel. Then

remain as stationary as possible while you install them.

3. Remove the memory chips from their package and inspect

each one. The pins should point inward at slightly less than

a 90° angle.

If any of the pins are bent, straighten them gently with your

fingers or with small tweezers to align them with the other

pins. Be careful when you do this; the pins are fragile and

can break off easily.

4. Position one of the ZIP

S

 over the first socket (VM03) as

shown below, aligning the pins on the chip with the holes

in the socket.