Epson 20 Benutzerhandbuch

After you install (or remove) an option card, follow these steps to

replace the computer’s cover:

1. Facing the front of the computer, position the cover on the

computer as shown in the following illustration. Pull the sides
outward slightly and ease the curved edge on each side of the

cover underneath the ledge on the bottom of the computer.

Slide the cover straight back until the front panel is flush with

the diskette drive and key lock.

Replace the five screws on the back panel to secure the cover.

Return the computer to its original position and place the

monitor on top, if that is where you use it. Then reconnect the
computer to the monitor, printer, keyboard, and any other
peripherals you have.

Check to be sure the power switch on the computer is off. Then
reconnect the power cable to the back of the computer and to an

electrical outlet.