Gigabyte GA-K8VT800-RH Benutzerhandbuch

GA-K8VT800-RH Motherboard

- 42 -

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Frequency/Voltage Control

K8 CPU Clock Ratio

[Default]

Auto Detect DIMM/PCI Clk

[Enabled]

Spread Spectrum

[Enabled]

CPU Clock

[200MHz]

CPU OverVoltage Control

[Auto]

AGP OverVoltage Control

[Auto]

DIMM OverVoltage Control

[Auto]

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults       F7: Optimized Defaults

Item Help

Menu Level`

Default

Set CPU clock ratio to default. (Default value)

x4 800MHz~x10 2000MHz Set CPU clock ratio from x4 800MHz to x10 2000MHz.

Enabled

Detect the DIMM/PCI clock automatically. (Default value)

Disabled

Disable this function.

Enabled

Enable clock spread spectrum. (Default value)

Disabled

Disable this function.

200MHz ~ 255MHz Set CPU Host Clock from 200MHz to 255MHz.

Incorrectly using this function may damage your system. For power users only.

Auto

Set CPU voltage as CPU required. (Default value)

+5%

Increase CPU voltage by 5%.

+7.5%

Increase CPU voltage by 7.5%.

+10%

Increase CPU voltage by 10%.

Warning: CPU may be damaged or CPU life-cycle may be reduced when CPU is over-voltage.

Auto

Set AGP voltage as AGP required. (Default value)

+0.1v

Increase AGP voltage +0.1V.

+0.2v

Increase AGP voltage +0.2V.

Incorrect using these features may cause your system broken. For power end-user use only.