Apple MD094LL/A Benutzerhandbuch
iMac (27-inch, Mid 2010) Take Apart — Glass Panel
140
2010-09-09
Removal
Note: Glass panel is held
in place by magnets.
in place by magnets.
Caution: Unlike previous
model iMacs, the glass
panel has tabs along
bottom that align with
rear housing. Be careful
not to damage tabs when
removing glass panel.
model iMacs, the glass
panel has tabs along
bottom that align with
rear housing. Be careful
not to damage tabs when
removing glass panel.
Apple strongly
recommends wearing
clean, lint-free gloves
whenever handling the
glass panel, to reduce
cleaning required on
reassembly.
recommends wearing
clean, lint-free gloves
whenever handling the
glass panel, to reduce
cleaning required on
reassembly.
1
The glass panel can
be removed in various
ways:
ways:
•
Lay computer on
its back and press
clean suction cups in
opposite corners on
glass panel, or...
its back and press
clean suction cups in
opposite corners on
glass panel, or...
•
Lay computer on its
back and press clean
suction cups in top
right and left corners
on glass panel, or...
back and press clean
suction cups in top
right and left corners
on glass panel, or...
•
Stand computer
upright and use your
finger nails to pull
glass forward along
top edge
upright and use your
finger nails to pull
glass forward along
top edge
2
Lift glass panel off the
magnets.
magnets.