Apple 073-0724 Benutzerhandbuch

Seite von 5
 
073-0724 Rev. A
 
 
 
 
Power Mac G4 (Mirrored Drive Doors)
 
SCSI Cable
 
Replacement Instructions
 
Follow the instructions in this sheet carefully. Failure to follow these instructions could 
damage your equipment and void its warranty.
 
Note:
 
 Written and video instructions covering customer-installable parts are available at 
http://www.info.apple.com/installparts/.
 
Warning: During this procedure, keep small parts away from children.
 
Tools Required
 
The only tool required for this procedure is a Phillips screwdriver.
 
Opening the Computer
 
Warning: Always shut down your computer before opening it to avoid damaging its 
internal components or causing injury. After you shut down the computer, the 
internal components can be very hot. Let the computer cool down before 
continuing.
 
1.
Place your computer on a clean, flat surface.
2.
If you think your computer is in sleep, press the power button on the front of the 
computer to wake it.
3.
Shut down your computer and wait five minutes before continuing. 
4.
If you attached a security cable through the computer’s lockable cover latch, remove 
the cable.
5.
Unplug all other cables from the computer except the power cord.