Apple 073-0937 Benutzerhandbuch
Power Mac G4 Zip Drive Bezel -
3
Removing the Installed Zip Drive Bezel
1. From inside the chassis, behind the front panel, push the bezel tab forward to
release the right side of the bezel.
(Figure 2)
2. Disconnect the hook on the left side of the bezel from the front panel and
remove the bezel from the computer.
Figure 2
Installing the Replacement Zip Drive Bezel
1. Align the hook on the left edge of the replacement bezel with the left edge of the
opening in the front panel.
2. Rotate the bezel until it is ush with the front panel, making sure the tab on the right
side of the bezel snaps into place.
Closing the Computer
1. Raise the side access panel, lift the latch, and press the panel against the case until it
snaps securely into place.
2. Reconnect all cables and restart your computer.
Warning: Never turn on your computer unless all of its internal and external
parts are in place and it is closed. Operating the computer when it is open or
missing parts can damage your computer or cause injury.
parts are in place and it is closed. Operating the computer when it is open or
missing parts can damage your computer or cause injury.