Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Apple
  4. 17-INCH MID 2006
  5. Benutzerhandbuch

Apple 17-INCH MID 2006 Benutzerhandbuch

Download
Seite von 160
iMac (17-inch (Mid 2006/Late 2006 CD) Troubleshooting — Symptom Charts 
12
Power Issues
No Power
 
The iMac will not turn on. The display remains black and there are no sounds from the fans or 
drives.
1. Verify the power outlet is good. Plug a different device into the socket to ensure there is power, 
or plug the iMac into another outlet. Does the iMac power on now?
Yes: Resolved. Bad outlet.
No: Go on to the next step.
2. Check the power cord. Use a known good power cord. Does the iMac power on  now?
Yes: Your power cord has failed. Replace the AC power cord.
No: Go on to the next step.
3. Check the connection of the power cord on both ends. Verify that the power cord is securely 
plugged into both the AC outlet and back of the computer. Does the iMac power on now?
Yes: You may have a loose fit to your power cord. Replace the AC power cord and test.
No: Go on to the next step.
4. Follow instructions in the General Information chapter to 
. Does the iMac power 
on now? 
Yes: Issue resolved.
No: Go on to the next step.
5. 
 modules. Does the iMac power on now?
Yes: Issue resolved.
No: Go on to the next step.
6. Remove the RAM access door, front bezel, and lower EMI shield to gain access to the three 
diagnostic LEDs.  See “
” in the General Information chapter for complete 
instructions on this procedure.
7. Plug the power cord into the iMac and the power cord into the AC outlet. Check to see if LED 
#1 is On or Off.
LED #1 is On: This indicates that the power supply is getting good power from the AC outlet. 
Go on to the next step.
LED #1 is Off: This indicates that either the power inlet assembly or the power supply should 
be replaced.