Advantech MDPC-4090 Benutzerhandbuch
MDPC-4090 User Manual
16
Chapter 3 MCH Chipset Setup
3.1 Introduction
MDPC-4090 has an Intel
82845 Memory Controller Hub (MCH), which
is designed for use with the Intel
Pentium
4 processor in a 478-pin pack-
age. The Intel
82845 Memory Controller Hub (MCH) for the host bridge and the Intel
82801DB I/O Controller Hub (ICH4) for the I/O subsystem. The MCH
provides the processor interface, system memory interface, AGP inter-
face, and hub interface in an 845E chipset desktop platform.
82801DB I/O Controller Hub (ICH4) for the I/O subsystem. The MCH
provides the processor interface, system memory interface, AGP inter-
face, and hub interface in an 845E chipset desktop platform.
3.2 Installation of Chipset Driver
Complete the following steps to install the chipset driver. Follow the pro-
cedures in the flow chart that apply to the operating system that you are
using within your MDPC-4090.
cedures in the flow chart that apply to the operating system that you are
using within your MDPC-4090.
Important
The following windows illustrations are examples
only. You must follow the flow chart instructions
and pay attention to the instructions which appear
on your screen.
only. You must follow the flow chart instructions
and pay attention to the instructions which appear
on your screen.
Note1
The CD-ROM drive is designated as “D” through-
out this chapter.
out this chapter.
Note2
<Enter> means pressing the “Enter” key on the
keyboard.
keyboard.
Note3
Before you install the AGP bus driver of MDPC-
4090, please ensure you have installed the INF
driver of the Intel 845E chipset. You can find this
driver in the Utility CD-ROM.
4090, please ensure you have installed the INF
driver of the Intel 845E chipset. You can find this
driver in the Utility CD-ROM.