Energizer EN1100 Benutzerhandbuch

Welcome

Please read this manual thoroughly before installing and operating your

new Energizer

Power Inverter. This manual contains information you

need to obtain the performance required for your application. Keep this

manual for future reference.

This Energizer

Inverter converts low voltage, direct current (DC) to 110

volt modified sine wave (MSW) alternating current (AC). The inverter

draws power from 12 volt, deep-cycle batteries such as those used for

marine, golf cart, and fork-lift or from other high current 12 volt sources.

This model, EN900 / EN1100, has been performance tested by MET and

complies with Underwriter’s Laboratories and Canadian Standards

Association safety standards.

A Higher Wattage Inverter May Be Required

To determine whether the Energizer

EN900 / EN1100 will operate a

particular appliance or a combination of appliances, run a test. All

inverters are designed to automatically shut down in the event of a power

overload. This protection feature prevents damage to the unit while

testing appliances with combined wattages in the 900 / 1100 watt range.

Turn on the highest wattage appliance first then other appliances. If an

appliance combination in the 900 / 1100 watt range will not operate

properly, then it is likely that this Energizer

inverter does not have the

required capacity to operate the appliance in question.

WARNINGS, CAUTIONS AND NOTES

It is very important that any operator and installer of this inverter read

and follow all WARNINGS, CAUTIONS AND NOTES and all installation

and operation instructions. In particular, comply with WARNINGS

(possibility of serious injury or death), CAUTIONS (possibility of damage

to the inverter and / or other equipment), and NOTES (included to assist

you in achieving the maximum performance and longest working life from

this advanced-design inverter).