Samsung SER-6500 Benutzerhandbuch
SAMSUNG SER6500/40 PROGRAMMING & OPERATING MANUAL
3
All clear procedure
Turn key to S-Mode. Unplug the register, hold down the third key up from the lower right key on the keyboard,
while holding down this key plug the register back in. An all clear keyboard receipt is issued.
while holding down this key plug the register back in. An all clear keyboard receipt is issued.
5
6
CHECK
2
3
SBTL
00
.
CASH
Use this key for all clear procedure regardless of what key function is programmed at that location
REGI NO.
X/TIME
: This machine’s register no.
DDMMYYHHMM
X/TIME
: Current date and time.
Z3(SER6500) /
X/TIME
: If you press “1” and X/TIME key the ECR makes Z3/Z2
Z2(SER6540)
report area. Otherwise it will not make Z3/Z2 area.
NO. OF CLERKS
X/TIME
: Enter no. of clerks. If you press only X/TIME key then
machine’s no. of clerk will be one.
machine’s no. of clerk will be one.
CHECK TYPE
X/TIME
: If you press “1” and X/TIME key, the check type will be
SOFT CHECK. Otherwise it will be HARD CHECK.
SOFT CHECK. Otherwise it will be HARD CHECK.
CHECK LINE
X/TIME
: If you select check type as SOFT CHECK, it requires
CHECK LINE.
CHECK LINE.
NO. OF CHECKS
X/TIME
: Enter no. of checks. If you press only X/TIME key then
no. of check will be zero.
no. of check will be zero.
CLERK INT
X/TIME
: If you press “1” and X/TIME key, this machine will
allocate memory for clerk interrupt / floating clerk.
allocate memory for clerk interrupt / floating clerk.
PLU STOCK
X/TIME
: If you press “1” and X/TIME key, this machine will
allocate memory for PLU stock taking feature.
allocate memory for PLU stock taking feature.
NO. OF PLUs
X/TIME
: Enter no. of PLU. If you press only X/TIME key then
no. of PLU will be automatically set as a maximum value.
no. of PLU will be automatically set as a maximum value.
* There are two check types. HARD CHECK and SOFT CHECK.
HARD CHECK carries only sales amount No Detail of the bill is stored.
SOFT CHECK carries all information regarding a check, this option would normally be used where full detail of the
check is required.
HARD CHECK carries only sales amount No Detail of the bill is stored.
SOFT CHECK carries all information regarding a check, this option would normally be used where full detail of the
check is required.
** CHECK LINE means the no. of detail lines which contain sales information. i.e. number of items sold on a bill.
HARD CHECK only hold the sales amount, so if your check type is HARD CHECK it does not require “Check
Line” preset and skips this part.
HARD CHECK only hold the sales amount, so if your check type is HARD CHECK it does not require “Check
Line” preset and skips this part.
*
**