Panamax MAX 5300 Benutzerhandbuch

Switched Outlets Pushbutton:
1 of 2 Triggers that can activate a 
turn-on or shutdown sequence for 
Outlet Bank 2 and High-Current outlets.

LED Indicators:
Status indicator lights 
for Switched Outlets, 
DC Voltage Trigger,
Ground OK, 
Line Fault 
and Unsafe Voltage

Meter Light Dimmer:
Controls brightness 
of the Voltmeter 
backlighting.

High Current Outlet Bank: 
Two delayed outlets designed for
high-current components such as
amplifiers and powered subwoofers.
The current available to connected
equipment is not limited by the
noise filtration components. 

Voltage Sense 
Trigger Input: 
1/8 inch Mini-Plug jack.
Connect to a remote trigger
device that provides 12VDC to
trigger a startup/shutdown
sequence.  This is the second
trigger that will activate the
MAX

®

5300 turn-on or shut -

down sequence.  (See switched
outlets pushbutton on front
panel).

Voltage Sense 
Trigger Output: 
1/8 inch Mini-Plug jack.
Connecting a 12VDC trig-
ger to the Voltage Sense
Circuit will allow the same
signal to pass through the
Voltage Sense Output to
control the startup/shut-
down of an additional
device.

High Current
Outlets Turn-On
Switch: 
3-position slide switch.
Allows adjustment of
the Turn-On delay for
the two High-Current
Outlets.  Choose
between 0, 10 and 30
seconds.

Outlet Bank 2 Turn-
Off Switch: 
3-position slide switch.
Allows adjustment of the
Turn-Off delay for Outlet
Bank 2.  Choose
between Always-On, 
10 and 30 seconds. 

Satellite Coax Jacks: 
Two pairs of gold plated 
F-Connectors optimized 
for Satellite TV signal
line protection.

Cable TV Coax Jacks: 
Two pairs of gold plated 
F-Connectors optimized for
Cable TV and non-ampli-
fied Rooftop Antenna signal
line protection.

Telephone Jacks:
In/Out connections
for telephone line or
pay-per-view line
protection. 

Voltmeter:
Backlit analog meter
measures incoming
voltage source from
0-150 VAC.

Convenience Outlet:
Provides a quick convenient
way to plug in components
such as camcorders and
video game systems.

IEC Main Power
Receptacle:
Detachable power
cord connects to
this receptacle.

15A Circuit Breaker: 
Opens in the event that
equipment plugged into
the MAX

®

5300 draws too

much current.  When the
white button of the breaker
is visible, the breaker has
opened.  Reduce the load
and push to reset.

Ground Lug:
Provides a
common
grounding point
for equipment
with separate
ground leads.

Filtered Outlet Bank 1: 
Four Always-On, Balanced
Double L filtered outlets for
audio/video components that
require constant power to
maintain programmed settings.

Filtered Outlet Bank 2: 
Four switched, Balanced
Double L filtered outlets for
audio/video components that
do not require constant power.