MGE UPS Systems 9 kVA Benutzerhandbuch
Page 30 -
51033212EN/AC
6. Appendices
Out of tolerance
The AC input source is either absent or its voltage or frequency is outside the
set limits.
set limits.
Percent load
Ratio between the power drawn by the connected equipment and the total
power that the UPS can supply.
power that the UPS can supply.
Personalization
A number of UPS functions can be modified using the "UPS Driver" software
to better meet the user's needs.
to better meet the user's needs.
Sleep mode
This function shuts down the UPS after 5 minutes when it operates on
battery power and no load is detected on the UPS output. The UPS restarts
automatically as soon as the AC input source is restored.
battery power and no load is detected on the UPS output. The UPS restarts
automatically as soon as the AC input source is restored.
Start on battery power
This function makes it possible to energize the connected equipment even
when AC input power is not available (operation exclusively on battery power).
when AC input power is not available (operation exclusively on battery power).
Tolerance for AC-power
The range of frequency supplied by the AC-power source within which
source frequency
the UPS can operate in ON-LINE mode (double conversion).
UPS
Uninterruptible Power Supply.
UPS ON / OFF
It is possible to enable or disable use of UPS ON / OFF controls
via software
by the computer-system protection software.