Intel ATX12V Benutzerhandbuch

Seite von 43
ATX12V Power Supply Design Guide 
Version 2.0  
 
7
1.2.3.   Main Power Connector:  
 The 2 x 10 main power connector has been replaced by a 2 x 12 connector.  This was made to 
support 75 watt PCI  Express*requirements.  Pinout assignments are based on the SSI 
recommendation. 
With the added 12V, 5V, and 3.3V pins the need for an Aux Power connector is no longer 
needed and the guidance for this connector has been removed. 
1.2.4.  Separate current limit for 12V2 on the 2x2 connector:  
 The 12V rail on the 2 x 2 power connector should be a separate current limited output to meet 
the requirements of UL and EN 60950. 
1.3   Terminology 
The following terms are used in this document: 
  
Term Description 
Required 
The status given to items within this design guide, which are required to meet 
design guide and a large majority of system applications. 
Recommended 
The status given to items within this design guide, which are not required to 
meet design guide, however, are required by many system applications. 
Optional 
The status given to items within this design guide, which are not required to 
meet design guide, however, some system applications may optionally use these 
features. 
BA 
Declared sound power, LwAd.  The declared sound power level shall be 
measured according to ISO* 7779 for the power supply and reported according 
to ISO 9296. 
CFM 
Cubic Feet per Minute (airflow). 
Monotonically 
A waveform changes from one level to another in a steady fashion, without 
intermediate retracement or oscillation. 
Noise 
The periodic or random signals over frequency band of 0 Hz to 20 MHz.