Intel EPS1U Benutzerhandbuch

Seite von 31
 
SSI
  
EPS1U Power Supply Design Guide, V1.1 
Mechanical Overview 
There are two physical sizes of the power supply enclosure intended to accommodate power levels of 125W, 
250W and 350W.  There are two output connector designs.  A card edge solution to provide ease of installation 
and removal and a wire harness to provide a traditional cabled solution.  The chassis for the entry 1U power 
supply is designed for use in 1U rack mounted systems. 
4.1  High Power Card Edge Form Factor 
 
STATUS 
Large Power Form 
Factor 
The high power edge card form factor is intended for use at 250W and 350W power levels.  Refer to Figure 1 for 
details.  The supply will provide its output power via a card edge on the interior face of the power supply to 
provide users and manufacturers easy installation and removal of the power supply into the system. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 1:  Enclosure Drawing 
 
 
300.0 
+/-0.2
 
8.5 
+/-0.3
 
Interior Face View 
40.0 
+0.2/-0.5
 
Exterior Face View  
106.0 
+/- 0.2
 
80.92 
+0/-0.05
 
12.54 
+/-0.3
 
5.0 
+/-0.3
 
 
Fan 
IEC Connector 
 
Fan 
AC I/P
 
Bi-Color LED 
(PWR/Fail) 
IEC Connector 
Center Line 
53.0 
+/- 0.2
 
16.4 
+/- 0.2
 
IEC Connector 
Center Line 
All dimensions are in millimeters. 
Top View 
Side View 
62 
32 
31