Transition Networks CPSMP-130 Benutzerhandbuch

The Transition Networks CPSMP-130  power supply is a 48-VDC slide-in-module
that provides optional, redundant power to the CPSMC1310-100 13-slot
PointSystem™ chassis and any installed media converter slide-in-modules and
management modules.  

The Transition Networks CPSMP-140  power supply is a 24-VDC slide-in-module
that provides optional, redundant power to the CPSMC1320-100 13-slot
PointSystem™ chassis and any installed media converter slide-in-modules and
management modules.  

The figure below illustrates the components of both types of power supplies:

•

An On/Off switch that, when set to “I”, allows the power supply module
to supply power to the chassis, and any installed modules.

•

A  panel fastener screw that secures the power supply module to the
chassis.

•

A power LED indicator.

•

A  handle for installing and removing the power supply module to/from
the chassis.

•

A  fuse installed on the circuit board inside the power supply module’s
housing.

•

A set of three (3) external power connectors that distribute power from an
external DC outlet to a chassis ground connector, a positive (+)
connector, and a negative (-) connector on the power supply module.

I

0

-
+

+

+

+

+

I

0

-
+

Install the Power Supply Module  . . . . .3
Connect to External Power  . . . . . . . . .4
Replace the Power Supply Module  . . .6
Replace the Fuse  . . . . . . . . . . . . . . . . .8
Technical Specifications  . . . . . . . . . .10
Troubleshooting  . . . . . . . . . . . . . . . .11
Contact Us  . . . . . . . . . . . . . . . . . . . .11
Compliance Information  . . . . . . . . . .12