Nortel Networks BCM1000 Benutzerhandbuch
Chapter 1 Introducing the Business Communications Manager
25
Installation and Maintenance Guide
BCM1000 LEDs
A line of 10 operational LEDs display on the face of the BCM1000. Refer to
. These
LEDs show the current state of various hardware components.
Figure 8 BCM1000 operational LEDs
These LEDs monitor:
•
power (
)
•
disk drive (
)
•
system status (
)
•
five PCI power indicators
•
temperature ( )
•
fans (
)
The LED states are described in
The Unified Manager contains a monitoring tool, that allows you to determine the current
condition of the LEDs from your computer. Refer to
condition of the LEDs from your computer. Refer to
Note:
These LEDs correspond to the cards, not to the PCI slots.
For example, a WAN card uses only one PCI slot, but has the capacity for two
connections. In this case, both LEDs stay lit as long as a WAN card is present.
connections. In this case, both LEDs stay lit as long as a WAN card is present.
Operational LEDs
Fan
Temperatur
PCI Devices
Status
Disk
Power
Temperature
1
PCI devices