Nortel Networks BCM1000 Benutzerhandbuch

Chapter 1 Introducing the Business Communications Manager

Installation and Maintenance Guide

 provides an overview of the installation process described in this book.

Figure 10   Installation and initialization overview

Select the 

media

 

bay 

modules you 

require

Install 

BCM1000

and (optional) 

BCM1000e

The number of telephone lines and extensions you need determines the number and 
type of media bay modules you need. For instructions about how to select the media 
bay modules, refer to 

The BCM1000 performs the main computing tasks. It contains the telephony and 
data networking components. For instructions about how to install the base unit, 
refer to 

.

If your system requires more than three media bay modules, you must install a 
BCM1000e. For instructions about how to install the BCM1000e, refer to 

.

Set the 

media bay 

module 

switches

Before you install the media bay modules, you must set the switches on the back of 
the modules to select the DS30 channel the modules will use to access lines and 
extensions (DNs). For instructions about how to set the switches, refer to 

.

Install the 

media bay 

modules

After you have set the switches, install the media bay modules into the BCM1000 or 
the BCM1000e. For instructions about how to install the media bay modules, refer to 

Power up

the BCM1000 

and 

BCM1000e

When you have the main hardware connected, start the system to ensure the first 
level of hardware and software is working. For instructions about how to correctly 
start the units, refer to