Nortel Networks BCM1000 Benutzerhandbuch
Chapter 5 Installing the BCM1000
73
Installation and Maintenance Guide
Figure 28 Attaching the rack mounting bracket to the BCM1000
Installing the BCM1000 into the rack
After the brackets are installed, perform the following steps to install the BCM1000 in the
equipment rack:
equipment rack:
1
Determine the location in the rack you want to install the base unit.
2
Position the base unit in the rack.
3
Align the holes in the rack mounting bracket with the holes in the equipment rack rails.
4
Fasten the rack mounting brackets to the rack using four screws (not supplied).
Refer to
Figure 29 Fasten the BCM1000 to the equipment rack