Samsung P63FP-2 Benutzerhandbuch

of the brackets and hinge holes to the corresponding anchor holes and insert and tighten

the 11 screws A.

To mount the product on the wall bracket

The shape of the product may vary depending on the model. (The assemblies of the plastic

hanger and the screw are the same)

1. Remove the 4 screws on the back of the product.

2. Insert the screw B into the plastic hanger.

Notice

• Mount the product on the wall bracket and make sure it is properly fixed to the left

and right plastic hangers.

• Be careful when installing the product on the bracket as fingers can be caught in the

holes.

• Make sure the wall bracket is securely fixed to the wall, or the product may not stay

in place after installation.

3. Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear holes of the product.

Introduction