Marantz VP-12S1s Benutzerhandbuch
3
INTRODUCTION
ENGLISH
z COMPONENT VIDEO IN
Y, P
B
/C
B
, P
R
/C
R
connectors.
Connect the COMPONENT VIDEO output from video
equipment or an A/V processor/receiver with a component
video output.
equipment or an A/V processor/receiver with a component
video output.
x S-VIDEO IN
Connect the S-VIDEO output from a video equipment.
c VIDEO IN
Connect the composite video output from a video equipment.
v RGB IN
Connect the analog RGB output from a computer equipment.
b AUX DV IN
Connect the i.LINK(DV-SD format) output from a video
equipment.
equipment.
n AUX OPTICAL
Connect the optical input from an audio equipment.
Audio out terminal of DV-IN signal.
Audio out terminal of DV-IN signal.
VP-12S1
z
c
m
⁄4
⁄6
⁄5
⁄0
,
⁄3
⁄2
⁄7
x
n
b
v
⁄1
.
Right Side and Rear
m AUX AUDIO OUT (DIGITAL)
Connect the COAXIAL input from an audio equipment.
Audio out terminal of DV-IN signal.
Audio out terminal of DV-IN signal.
, REMOTE CONTROL IN/OUT
By connecting this projector to another Marantz audio
component using a supplied System Control cable, you can
remotely operate the components as a single system.
• When connecting to component with a remote sensor
component using a supplied System Control cable, you can
remotely operate the components as a single system.
• When connecting to component with a remote sensor
(such as the SR-14,SR-18,SR-19), be sure to connect the
"REMOTE CONTROL IN" jack of this projector to the
"REMOTE CONTROL OUT" jack of the component with
the remote sensor.
"REMOTE CONTROL IN" jack of this projector to the
"REMOTE CONTROL OUT" jack of the component with
the remote sensor.
• When connecting to component which is not equipped
with a remote sensor, be sure to connect the component
to the "REMOTE CONTROL OUT" jack of this projector.
to the "REMOTE CONTROL OUT" jack of this projector.
. REMOTE switch (EXTERNAL/INTERNAL)
When using this projector independently, set this switch to
"INTERNAL". When using this projector in a system with a
Marantz DVD player or AV Receiver equipped with a remote
sensor, set the switch to "EXTERNAL".
"INTERNAL". When using this projector in a system with a
Marantz DVD player or AV Receiver equipped with a remote
sensor, set the switch to "EXTERNAL".
⁄0 TRIG.1(TRIGGER 1)
When the unit is turned on, 12V is output. When the unit is
turned off, no voltage is output. This allows such as a powered
up/down screen,whenever the projector is turned on or off.
turned off, no voltage is output. This allows such as a powered
up/down screen,whenever the projector is turned on or off.