Panasonic PT-EZ580 PT-EW640 PT-EX610 PT-EW540 PT-EX510 Benutzerhandbuch

Chapter 4 Settings — [PROJECTOR SETUP] menu

ENGLISH - 93

Adjusting the left to right audio balance

1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.

The

[AUDIO SETTING] screen is displayed.

3) Press as to select [BALANCE].
4) Press qw to adjust the level.

Operation

Adjustment

Range of adjustment

Press w.

Increases the volume on the right.

L16 - R16

Press q.

Increases the volume on the left.

Setting audio output of the built-in speaker

1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.

The

[AUDIO SETTING] screen is displayed.

3) Press as to select [BUILT-IN SP].
4) Press qw to switch the item.

The items will switch each time you press the button.

[ON]

Audio is output from the built-in speaker.

[OFF]

Audio is not output from the built-in speaker.

Note

Audio is output from the built-in speaker even if the cable is connected to the <VARIABLE AUDIO OUT> terminal. To output audio from

external audio devices connected to the <VARIABLE AUDIO OUT> terminal and not from the built-in speaker, set [BUILT-IN SP] to [OFF].

Setting audio output in the standby mode

1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.

The

[AUDIO SETTING] screen is displayed.

3) Press as to select [IN STANDBY MODE].
4) Press qw to switch the item.

The items will switch each time you press the button.

[OFF]

Audio is not output during standby.

[ON]

Audio is output during standby.

Note

When [STANDBY MODE] (x page 88) in [PROJECTOR SETUP] menu → [ECO MANAGEMENT] is set to [ECO], audio cannot be output

during standby.

Setting to mute mode

1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.

The

[AUDIO SETTING] screen is displayed.

3) Press as to select [MUTE].
4) Press qw to switch the item.

The items will switch each time you press the button.