Panasonic PT-FW300NTU Benutzerhandbuch
DISPLAY OPTION menu
E
NGLISH - 39
Settings
J SCREEN POSITION
You can change the displaying position of the
menu. When SCREEN FORMAT is set to 16:10,
you can change the displaying position of the
menu. Press
menu. When SCREEN FORMAT is set to 16:10,
you can change the displaying position of the
menu. Press
I H to select the required option.
LOW
Displays the menu in the lower part
of the screen.
of the screen.
CENTER
Displays the menu in the middle of
the screen.
the screen.
HIGH
Displays the menu in the upper part
of the screen.
of the screen.
You can switch the logo on/off that is displayed when
starting up the projector. Press
starting up the projector. Press
I H to select the
required option. STARTUP LOGO will be displayed for
30 seconds.
30 seconds.
ON
Active
OFF
Deactive
USER
Display the original text
Q Editing the original text
If you select USER, you can display the 2 lines of
original text up to 40 characters in 1 line instead of
the logo.
original text up to 40 characters in 1 line instead of
the logo.
1. Select USER and press ENTER.
2. Select the required line to enter or edit the original
2. Select the required line to enter or edit the original
text, and press the ENTER button.
3. Enter the characters and repeat until finish the line.
Use
F G I H to specify the location of the required
character, and press the ENTER button.
Move the cursor to ALL DELETE and press the
ENTER button to delete all the entered text line.
Press the DEFAULT button to delete the last entered
character or indicated with the cursor in the text line.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press
and press
G to select a character.
4. Select OK and press the ENTER button to set the
entered text in a box.
Press
G and edit the TEXT2 if you need to, and
repeat the step 3.
You can turn off the AUTO SETUP button function for
when the COMPUTER signal is detected.
when the COMPUTER signal is detected.
AUTO
When the projector detects a
COMPUTER or DVI signal, adjust
the projected image position
automatically for SHIFT, SIGNAL
SEARCH, DOT CLOCK and CLOCK
PHASE.
COMPUTER or DVI signal, adjust
the projected image position
automatically for SHIFT, SIGNAL
SEARCH, DOT CLOCK and CLOCK
PHASE.
BUTTON
Only when the AUTO SETUP button
is pressed, the projected image
position will be adjusted for DOT
CLOCK and CLOCK PHASE. See
“Remote control” on page 14.
is pressed, the projected image
position will be adjusted for DOT
CLOCK and CLOCK PHASE. See
“Remote control” on page 14.
You can turn off the auto signal detecting system.
ON
Detect the input signal from the
terminals and project the image.
terminals and project the image.
OFF
Deactive
You can choose a BLUE or BLACK screen for when the
projector is idle. Press
projector is idle. Press
I H to select the required option.
When projecting WIDE signals, switch to ON to display
the image in well adjusted size.
the image in well adjusted size.
AUTO
Automatic detective system
OFF
For 4:3 signals
ON
For WIDE signals
(16:9, 16:10 and 15:9)
(16:9, 16:10 and 15:9)
You can switch the projection mode between SXGA+
and SXGA for SXGA signals. Press
and SXGA for SXGA signals. Press
I H to select the
required option.
SXGA
Smaller setting
SXGA+
Larger setting
STARTUP LOGO
OK
CANCEL
ALL DELETE
TEXT CHANGE
AUTO SETUP
NOTE:
• Usually the recommended setting is AUTO.
SIGNAL SEARCH
NOTE:
• SIGNAL SEARCH is not available when any input
signal is projecting.
• Usually the recommended setting is ON.
BACK COLOR
WIDE MODE
SXGA MODE