Panasonic PT-DW8300E Benutzerhandbuch

z

[Exceed maximum 

number of projectors.]

Limit number of 

• 

projectors in same group 

to 8.

When linking 9 or 

• 

more projectors, use a 

computer and the [Multi 

Projector Monitoring & 

Control Software].

[Please check the 

COMMAND CONTROL 

setting.]

Turn [ON] the 

• 

[COMMAND CONTROL] 

on the on-screen menu 

[NETWORK CONTROL] 

for the projector with the 

error display.

Set [COMMAND 

• 

PORT] of [NETWORK 

CONTROL] of all linked 

projectors to the same 

value.

[Please check the 

USER NAME and 

PASSWORD in the 

COMMAND CONTROL 

setting.]

Set the [USER NAME] 

• 

and [PASSWORD] for the 

administrator authority for 

[WEB CONTROL] of all 

the linked projectors to 

the same text string.

[Cannot apply 

BRIGHTNESS 

CONTROL. Please 

check projector status.]

Projector is in standby 

• 

state. Turn on power.

[Brightness Sensor 

Error]

There is a fault in the 

• 

brightness sensor. If the 

fault is not corrected by 

turning the power off and 

back on, consult your 

dealer.

If the linked projectors are not listed, check the following.

 

z

The devices on the network all have different IP 

• 

addresses.

The LAN cable is connected correctly. 

• 

The sub-nets of the projectors are the same.

• 

The [LINKS] are set in the same group.

• 

 

z

page 94) or “ 

Q

 The name of this projector is displayed.

 The state is indicated by color.

GREEN :  The brightness can be corrected by a 

significant margin.

YELLOW :  The brightness can no longer be 

corrected by a significant margin.

RED :  There is an error in brightness control.

J

The following is an example of adjustment procedure 

for linking the brightness of 8 projectors that form a 

network.