Panasonic PT-DW7000U Benutzerhandbuch

Automatic adjustment

(Only for RGB input)

Use this setting when adjusting a specific or oblong
(16:9, etc.) signal.

Press the MENU button.

The MAIN MENU screen will be displayed.

Select “OPTION” with the
buttons.

Press the ENTER button.

The OPTION screen will be displayed.

Using the

buttons, select “AUTO

SETUP”.

Press the ENTER button.

The AUTO SETUP screen will be displayed.

Using the

buttons, switch to the

desired mode.

“DEFAULT”: to receive signals of which image

aspect is 4:3 or 5:4

“WIDE”:

to receive signals of which image
aspect is 16:9 (oblong)

“USER”:

to receive signals of specific horizontal
resolution (number of horizontally
displayed dots)

If “USER” is selected, enter the
horizontal resolution of signal source
into “number of horizontally displayed
dots” using

buttons.

Press the ENTER button.

Execute automatic adjustment.
A message “PROGRESS...” appears during
automatic adjustment.
When the adjustment is complete, the system
returns to the input screen.

MODE

DEFAULT

WIDE

Applicable resolution

640 x 400, 640 x 480, 800 x 600, 832 x
624, 960 x 720, 1 024 x 768, 1 152 x 864,
1 152 x 870, 1 280 x 960, 1 280 x 1 024,
1 600 x 1 200, 1 400 x 1 050

720 x 400, 848 x 480, 1 280 x 720,
1 120 x 750, 1 376 x 768, 1 600 x 1 024

Video setting

This feature allows the user to select the signaling
system according to the connected device.

Select “VIDEO SETTING” from the
“OPTION” screen and press the ENTER
button.

The “VIDEO SETTING” screen will be displayed.

Use the

buttons to select

"VIDEO" or "S-VIDEO".

Use the

buttons to select “AUTO

1” or “AUTO 2”.

“AUTO1”: The system is automatically selected from

among NTSC, PAL, SECAM, NTSC4.43 and
PAL60.

“AUTO2”: The system is automatically selected from

among NTSC, PAL-M and PAL-N.

Note

• When ET-MD95VM2 (optional) is

mounted, an item of “VIDEO SELECT” will
appear on the “VIDEO SETTING” screen
allowing the used to select either “LINE or
Y/C” or “YC

”.