Panasonic ET-PKB80 Merkblatt
Attachment plate
ø49
81
(3-3/16˝)
178
(7˝)
370
(14-9/16˝)
117
(4-19/32˝)
374
(14-23/32˝)
70 (2-3/4˝)
110 (4-11/32˝)
140 (5-/12˝)
160 (6-5/16˝)
3- Ø9.5 (3/8˝)
Ø8.5 (11/32˝)
65
(2-9/16˝)
357–
437 (14-1/16˝–17-7/32˝)
(Adjustable in 20 mm (25/32˝) steps)
150 (5-29/32˝)
130 (5-1/8˝)
100 (3-15/16˝)
20 (25/32˝)
Projector
ø43
(1-15/16˝)
(1-11/16˝)
S
P
E
C
F
I
L
E
ET-PKB80
Ceiling mount bracket for high ceilings
As of August 2008
< 1 >
Specifications
Vertical correction angle:
+20°, -5°
Horizontal slant correction angle:
±10°
Horizontal turn correction angle:
±5°
Dimensions (W x H x D):
374 x 400 – 480 x 211 mm (14-23/32˝ x 15-3/4˝–18-29/32˝ x 8-5/16˝)
Weight:
2.8 kg (6.2 lbs)
Attachment plate
Illustration shows the ET-PKB80 attached to the projector.
Parts
Attachment plate . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . 1
Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . 1
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster A . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster B . . . . . . . . . . . . . . . . . . . . . . 1
Holding bracket A . . . . . . . . . . . . . . . . . . . . . 1
Holding bracket B . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts (M6 x 12) . . . 19
Washer-fitted screws (M4 x 10) . . . . . . . . . . . 6
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . 2
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Weights and dimensions shown are approximate. Specifications subject to change without notice.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is to be used when mounting LCD projectors to the ceiling.
This ceiling mount bracket is to be used when mounting LCD projectors to the ceiling.
C a u t i o n :
•
All mounting work must be done by a qualified technician.
•
Ensure that the mounting (ceiling) area has sufficient strength.
•
Read the enclosed mounting instructions carefully before starting the mounting procedure.
•
Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool
should be used.
should be used.
•
When the system is no longer to be used, have a qualified technician promptly remove and dispose of it.