Panasonic D6KE Benutzerhandbuch

 Before replacing the ACF



Wait until the cooling fan stops and t

urn off the 

 switch of the projector in proper way.



Disconnect the mains lead from the mains socket.



Contact an Authorised Service Centre to purchase a replacement ACF (ET-ACF100).



The ACF unit to be replaced should be an unused product.

 When to replace the ACF

The ACF unit is consumable product and effects on ventilation. The FILTER indicator will inform you of the 
replacement timing. You can check the remaining amount of the ACF unit in REMAINING FILTER of STATUS 
in PROJECTOR SETUP menu.

 Replacement procedure

1. Loosen “ACF cover fixing screw” (1 screw) until the 

screws turn freely and remove the ACF cover.

2. Slide out the ACF unit from the projector slowly.



When you replace the ACF unit, clean the 
compartment and/or the air exhaust port if you need 
to.

3. Insert the new ACF unit into the compartment in 

correct direction and slightly push until it clicks.

4. Attach the ACF cover and tighten “ACF cover 

fixing screw” (1 screw) securely.

 Resetting the REMAINING 

1. Turn on the projector and display the FILTER 

 in PROJECTOR SETUP 

menu.

2. Press the ENTER button.



The confirmation screen will be displayed.

3. Select OK by pressing I, then press the ENTER 

button.

4. Display the STATUS in PROJECTOR SETUP 

menu and confirm the REMAINING FILTER.

ACF cover fixing screw

ACF cover

ACF unit

• If the ACF and/or ACF cover are attached incorrectly, the 

projector may not be turned on.

• The replacement timing of the ACF depends on environment of 

usage.

• See FILTER COUNTER RESET and STATUS in 

 menu of the functional instructions that 

is in the provided CD-ROM.