Panasonic PT-AE3000E Benutzerhandbuch

You can use the 2 different test patterns to adjust the 
focus and zoom of the image. See “Lens shift and 
positioning” on page 16.

1. Press ENTER to display test pattern 1.

 

Press F G to adjust the focus and I H to adjust 
the zoom.

2. Press ENTER to display test pattern 2.

 

Press F G to adjust the focus and I H to adjust 
the zoom.

3. Press ENTER to display the projected image.

 

You can confirm the adjustment is fit to the projected 
image.

4. Press MENU or RETURN to return to the previous 

menu, or press repeatedly to escape the menu 
mode.

You can access the saved lens control settings instantly. 

1. Select a setting from LENS MEMORY 1 - 3.
2. Press the ENTER button to activate.

You can save and name the adjusted ZOOM/FOCUS, 
H-AREA POSITION and V-AREA POSITION settings in 
memory.

1. Adjust ZOOM/FOCUS, H-AREA POSITION and 

V-AREA POSITION.

2. Select the LENS MEMORY SAVE and press the 

ENTER button.

3. Select the required memory setting and press the 

ENTER button.

4. The confirmation screen will be displayed. Select 

OK and press the ENTER button.

 

Indicated with 

★

 is in use, and 

✩

 is empty.

5. Name the lens memory setting.

 

Use F G I H to specify the location of the required 
character to enter and press the ENTER button.

6. Repeat step 5 until you finish the text line.

 

You can enter up to 16 characters.

 

Move the cursor to ALL DELETE and press the 
ENTER button to delete all the entered text line.

 

Press the DEFAULT button to delete the last entered 
character or indicted with the cursor in the text box.

 

To insert a character in the entered text line, move 
the cursor to the text box to select the required place 
and press G then perform step 5.

7. Select OK and press the ENTER button to set the 

entered text as a name.

• The saved lens memory adjustment accuracy is not 

guaranteed. 

• If the memorised ZOOM/FOCUS adjustment is not 

accurate enough, adjust the ZOOM/FOCUS menu 
again.

• If the power supply is stopped while loading or saving 

the lens memory, saved adjusted settings may differ 
from the original after restart the projector. Adjust the 
ZOOM/FOCUS menu again.

• When the projector and/or the screen is tilted, adjust 

the focus at the centre of the image. The upper and 
lower edge might be out of focus.

• When the image is distorted in keystone, adjust the 

KEYSTONE in POSITION menu. See “KEYSTONE” on 
page 39.

 

 

RETURN

FOCUS

ZOOM

ENTER

RETURN

FOCUS

ZOOM

ENTER

• The option that contains no saved adjustment will not 

be displayed.

• If there is no saved setting, the LENS MEMORY LOAD 

menu will not be selectable.

• If you leave the text box empty and save, the 

default memory number will stay as a name.

OK

CANCEL

ALL DELETE

LENS MEMORY NAME INPUT