Nokia 110S Benutzerhandbuch

GB 8

• Plug in your Mediamaster and the "First-time installation" menu

appears.    

• Press ok to continue.  

• Select the desired menu language using the cursor up/down

button.

• This will also become the main language for audio and 

subtitling.

• Press ok to continue.

 

• Select the “One antenna/one LNB configuration” alternative if

you have a single antenna equipped with one LNB for receiving
signals.

• Select the “Multisatellite/DiSEqC switch configuration” alter-

native if you have one antenna with two or four LNBs or two 
antennas with one or two LNBs each for receiving signals 
from a combination of satellites. In these cases you will 
also need a 2-way or a 4-way DiSEqC switch. 

Select this alternative if you have one (1) LNB mounted 
on the antenna.

Select the correct LNB for your configuration. The most common
values, including Universal LNB, can be selected using the cursor
left/right button.

If the cable from the antenna is very long, the voltage at the LNB
could be too low to change the polarisation. You can increase the
voltage to the LNB by 0.5 V.

Select one of the pre-programmed satellites.