NEC NP-M282X Benutzerhandbuch
29
2. Projecting an Image (Basic Operation)
❾ Turning off the Projector
To turn off the projector:
1. First, press the
(POWER) button on the projector
cabinet or the STANDBY button on the remote con-
trol.
trol.
The confirmation message will be displayed.
2. Secondly, press the ENTER button or press the
(POWER) or the STANDBY button again.
After the projector turns off, the cooling fans keep operating
for a while (Cooling-off time).
The cooling fans stop operating when the projector turns
off and goes into standby mode. When in standby mode,
the POWER indicator will light red and the STATUS indica-
tor will light off when [NORMAL] is selected for [STANDBY
MODE].
the POWER indicator will light red and the STATUS indica-
tor will light off when [NORMAL] is selected for [STANDBY
MODE].
Power On
Steady blue light
Standby
Steady
red light
CAUTION:
Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the
AC power supply is disconnected during normal projector operation.
Use caution when picking up the projector.
AC power supply is disconnected during normal projector operation.
Use caution when picking up the projector.
NOTE:
• While the power indicator is blinking blue in short cycles, the power cannot be turned off.
• You cannot turn off the power for 60 seconds immediately after turning it on and displaying an image.
• Do not disconnect the AC power supply to the projector within 10 seconds of making adjustment or setting changes and closing
• While the power indicator is blinking blue in short cycles, the power cannot be turned off.
• You cannot turn off the power for 60 seconds immediately after turning it on and displaying an image.
• Do not disconnect the AC power supply to the projector within 10 seconds of making adjustment or setting changes and closing
the menu. Doing so can cause loss of adjustments and settings.