NEC XG85 Benutzerhandbuch

34

Adjustment data have different reference data areas depending on each operation.

All Gain

: All adjustment data except Ref.Adjust data

Ref. Adjust

: Ref.Adjust data

Adjustment data fall into two: REF. ADJUST menu adjustment and the other adjustment data (Operate and Adjust menu).

Data area falls into five:

INPUT LIST (00-99)

: Registered data (100) areas corresponding to INPUT LIST

DEFAULT DATA (1-6)

: Default (6) areas divided by horizontal frequency.

Cancel Data

: Data to be returned to default

Ref.Adjust Data

: REF.ADJUST data (1) area

Ref.Adjust (FACTORY AREA)

: REF.ADJUST data (1) area for factory preset.

NOTE: See the Set-up manual for ADJUST and REF.ADJUST menus.

All Gain

Ref. Adjust Data

Ref. Adjust Data (Factory Area)

Ref. Adjust Data

←

Ref.Adjust Data

Input List (00-99) or Default Data (1-6)

Default Data (1-6)*

Input List (00-99)*

Cancel Data*

Signal Select

Normalize

Load

Cancel

* The above list may be different if NORMAL/LOAD/CANCEL operation is performed during POINT convergence.

Output data during adjusting is the amount of data in each data area and data other than the current adjustment item ( data in

working area).

Point Data while adjusting Fine

Default  Data (1-6) + Point data except the current Fine data

Input List (00-99) + Point data except the current Fine data

Cancel Data + Point data except the current Fine data

Normalize

Load

Cancel

All Gain

INPUT LIST (00-99)*

Ref. Adjust

REF. ADJUST

STORE

* Point adjustment has more than one item and each item has its own working area. However, there is only one area where data is

saved with the Store function, which means no distinction is made among items in data.