NEC NP405 Betriebsanweisung

4. Convenient Features

 Changing Eco Mode

This feature enables you to select two brightness modes of the lamp:
OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE].

[ECO MODE]

Description

Status of LAMP indicator

[OFF]

This is the default setting (100% Brightness).

Off

STATUS

LAMP

[ON]

Select this mode to increase the lamp life (approx.
70% Brightness on NP610/NP510W/NP410W/
NP610S/NP510WS and approx. 80% Brightness on
NP510/NP410/NP405/NP310/NP305).

Steady Green light

STATUS

LAMP

To turn on the [ECO MODE], do the following:
1. Press the ECO MODE button on the remote control to display [ECO MODE] screen.
2. Use the

 or  button to select [ON].

3. Press the ENTER button.
To change from [ON] to [OFF], Go back to Step 2 and select [OFF]. Repeat Step 3.

NOTE:

• The [ECO MODE] can be changed by using the menu.

Select [SETUP]

→ [GENERAL] → [ECO MODE].

• The lamp life remaining and lamp hours used can be checked in [USAGE TIME]. Select [INFO.]

→[USAGE TIME].

• The projector is always in [ON] for 90 seconds after the lamp is turned on and while the POWER indicator is blinking green. The

lamp condition will not be affected even when [ECO MODE] is changed.

• After a lapse of 1 minute from when the projector displays a blue, black or logo screen, [ECO MODE] will automatically switch to

[ON]. The projector will return to the [OFF] once a signal is accepted.

• If the projector is overheated in [OFF] mode, there may be a case where the [ECO MODE] automatically changes to [ON] mode

to protect the projector. When the projector is in [ON] mode, the picture brightness decreases. When the projector comes back

to normal temperature, the [ECO MODE] returns to [OFF] mode.

Thermometer symbol [ ] indicates the [ECO MODE] is automatically set to [ON] mode because the internal temperature is too

high.

2. Press the

 button.

The area of the magnified image will be moved

3. Press the MAGNIFY (−) button.
Each time the MAGNIFY (−) button is pressed, the image is re-

duced.

NOTE:

• The image will be enlarged or reduced at the center of the screen.

• Displaying the menu will cancel the current magnification.

ENTER

EXIT

MAGNIFY

PAGE

OFF

POWER

AV-MUTE

DOWN