Enterasys Networks XSR CLI Benutzerhandbuch
RTP Header Compression Commands
XSR CLI Reference Guide 5-137
Routing Source Information:
192.168.28.0/24
via: 192.168.29.22
cost:2
age:16
FastEthernet2
1.1.1.1/32
via: 192.168.29.22
cost:2
age:16
FastEthernet2
10.0.0.0/32
via: 201.1.1.0
cost:2
age: -
Serial2/0:1.1
The following is sample output with the interface option chosen:
XSR#show ip rip interface
FastEthernet1 is UP
FastEthernet1 is UP
Internet Address 10.0.0.0, Mask 255.255.0.0
Triggered updates are enabled
Split
horizon
Send rip version is 1
Receive rip version is 2
Rip authentication mode is text, key is
Rip offset metric is 1
Serial1/1 is UP
Internet Address 11.0.0.0, Mask 255.255.0.0
Triggered updates are enabled
Split horizon with poison
Triggered on demand is enabled
TRIP number of retransmissions 50
TRIP polling interval120
Send rip version is 1
Receive rip version is 2
Rip authentication mode is text, key is
Rip offset metric is 1
Parameter Descriptions
RTP Header Compression Commands
The following commands configures the Real Time Protocol (RTP) header compression on PPP
serial interfaces.
serial interfaces.
The following criteria must be met in order to select packets fro RTP compression
Must be a UDP packet
Routing for networks
Networks assigned to routing using the
network
command in RIP.
Route Exchanging
Neighbors
Neighbors
Neighbors configured to trade routing data used in Pointto‐Point
exchange of routing data.
exchange of routing data.
Passive Interfaces
Ports RIP will not send update packets on.
Receive Interfaces
Ports RIP will not receive update packets on.
Distribute List
Access list for controlling receive/send updates.
Internet address
IP address and mask assigned to this interface.
Triggered updates
Respond to a request for a trigger update from another router.
Rip versions
Send and receive RIP versions.
Split Horizon
Split horizon mode.
Offset Metric
A value that will be added to routes learned via RIP.