Enterasys Networks XSR CLI Benutzerhandbuch
ARP Commands
XSR CLI Reference Guide 5-149
XSR>show ip pbr-cache
Source
Source
Destination Age(sec)
IP Prot TCP/UDP Port ICMP Code
192.168.1.1 192.168.27.1 109
1
8
192.168.1.1 192.168.27.33 70
255
192.168.1.1 192.168.27.33 50
6
(23,
23)
Parameter Descriptions
show route-map pbr
This command displays the Policy Map Table you have configured. This is the Global Route Map
that is used for Policy Based Routing.
that is used for Policy Based Routing.
Syntax
show route-map pbr
Mode
EXEC configuration:
XSR>
Sample Output
The following is sample output when the command is issued:
XSR>show route-map pbr
route-map pbr, sequence 10
Match clauses:
route-map pbr, sequence 10
Match clauses:
ip address 102
ip address 101
ip address 101
Set clauses:
next-hop 192.168.27.33
interface FastEthernet1
interface FastEthernet1
ARP Commands
arp
This command adds permanent (static) entries to the ARP (Address Resolution Protocol) table.
ARP converts an IP address into a physical address. The XSR permits adding/deleting one or all
ARP entries.
ARP converts an IP address into a physical address. The XSR permits adding/deleting one or all
ARP entries.
Source
Source IP address of the packet.
Destination
Destination IP address of the packet.
Age
Seconds left for the lifetime of the cache.
IP Protocol
IP Protocol number.
TCP/UDP Port
TCP/UDP Port number.
ICMP Code
ICMP code number.