Enterasys Networks XSR CLI Benutzerhandbuch
Virtual Router Redundancy Protocol Commands
XSR CLI Reference Guide 5-191
Virtual Router Redundancy Protocol Commands
vrrp <group> adver-int
This command configures the interval between successive advertisements sent by the master VR
in a virtual group. Advertisements sent by the master VR communicate the state and priority of
the current master VR.
in a virtual group. Advertisements sent by the master VR communicate the state and priority of
the current master VR.
Syntax
vrrp group adver-int [sec] interval
Syntax of the “no” Form
Use the no form of this command to restore the default value:
no vrrp group adver-int
Defaults
•
Interval: 1 second
•
Group: 1 , ranging from 1 to 255
Mode
Interface configuration:
XSR(config-if<xx>)#
Examples
The following example sets advertising interval 2 for VR group 2 on FastEthernet interface 1:
XSR(config)#interface fastethernet 1
XSR(config-if<F1>)#vrrp 2 adver-int 2
XSR(config-if<F1>)#vrrp 2 adver-int 2
The following example sets the default advertising interval for virtual router group 2 on F1:
XSR(config-if<F1>)#no vrrp 2 adver-int
vrrp <group> authentication
This command authenticates Virtual Router Redundancy Protocol (VRRP) packets received from
other routers in the group.
other routers in the group.
When a VRRP packet arrives from another router in the VRRP group, its authentication string
inside the packet is compared to the string configured on the local system. If the strings match, the
inside the packet is compared to the string configured on the local system. If the strings match, the
Note: All virtual routers in a virtual group must have the same advertisement interval.
group
VR group number.
interval
Interval between successive advertisements by master VR. Range: 1‐ 255 seconds.