NEC 2400 ipx Benutzerhandbuch
CHAPTER 2
NDA-24318
Page 16
Issue 1
Issue 1
CIRCUIT CARD EXPLANATIONS
When using an IPTRK circuit card for FCCS Networking via IP [F-36] (Point-to-Multipoint Connection),
connect an Ethernet cable from the IPCON connector to the router. Next, connect another Ethernet cable
from FCON connector to LANI card (CPR, PCI slot 00/03) via HUB. The following figure is an example
when connecting the IPTRK circuit card to the LANI of CPU0, PCI slot 0. When 100BASE-TX Ethernet
cable is connected to IPCON/FCON connector, IP100M or F-100M lamp lights green, respectively. When
using 10BASE-T Ethernet cable, the lamp does not light.
connect an Ethernet cable from the IPCON connector to the router. Next, connect another Ethernet cable
from FCON connector to LANI card (CPR, PCI slot 00/03) via HUB. The following figure is an example
when connecting the IPTRK circuit card to the LANI of CPU0, PCI slot 0. When 100BASE-TX Ethernet
cable is connected to IPCON/FCON connector, IP100M or F-100M lamp lights green, respectively. When
using 10BASE-T Ethernet cable, the lamp does not light.
Figure 2-6 Ethernet Cable Connection for FCCS Networking via IP [F-36] [IPTRK: Point-to-Multipoint]
5.0
A
5.0
A
slot3
slot0
slot3
slot0
8 Not used
7 Not used
6 RD -
5 Not used
4 Not used
3 RD +
2 TD -
1 TD +
7 Not used
6 RD -
5 Not used
4 Not used
3 RD +
2 TD -
1 TD +
0
2
4
A C
E
6
BASEU
Intranet
RJ-45 Connector
PIN Assignment
IPCON/FCON
Ethernet Cable
(Installation Cable)
PA-8IPTB
IPCON
FCON
RJ
-4
5
Ethernet Cable
(Straight Cable)
Ethernet Cable (Straight Cable)
HUB Circuit Card
PIM
LPM
LANI (PZ-PC19)
LANI (PZ-PC19)
POWER
Router
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
Precautions Required