Abocom SW500B Merkblatt

 

5-Port Fast Ethernet  
N-Way Switch

  

The 5-Port Fast Ethernet N-Way Switch provides you a flexible, reliable, 

and affordable solution of the Ethernet network.  It comes with five 

independent 10/100Mbps ports.  Each port delivers up to 200Mbps throughput, 

and is able to operate in either half or full-duplex modes.  

The 5-Port Fast Ethernet N-Way Switch also features N-Way (auto-negotiable), which automatically adjusts the device for 

optimal operation; “Store-and-Forward” architecture filters to eliminate error packets and improve efficiency. Plus, based on 

MDI/MDIX auto crossover technology, just use either a straight through or a crossover Ethernet cable, and you can get connected 

with any other devices.  

* Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX standards 

* “Store and Forward” architecture filters 

* IEEE 802.3x or Back Pressure (HDX) Flow Control 

* 2K MAC Address table supported 

* Five 10/100Mbps Auto-Detection ports 

* 10/100Mbps auto-detection on Full or Half Duplex 

 

* Power Feeding: +5Vdc/1.5A 

* Each Ethernet port supports MDI/MDIX  (auto crossover) capacity. 

IEEE 802.3 10Base-T Ethernet 
IEEE 802.3u 100Base-TX Fast Ethernet 
IEEE802.3x Flow Control 

CSMA/CD 

Five 10/100Mbps RJ-45 Ports (support Auto-MDI/MDIX) 

Store-and-Forward 

Full Duplex: IEEE802.3x 
Half Duplex: Back Pressure 

UTP Category 3 or better (10Base-T) 
UTP Category 5 or better (100Base-TX) 

10Mbps or 100Mbps (Half Duplex) 
20Mbps or 200Mbps (Full Duplex)

2K 

Power           Green 
LINK/ACT      

 

Green: on for successful connection, flashing for activity 

SPD          

                  

Green: on for 100Mbps, off for 10Mbps

 

82 x 66 x 20 mm

3

 (Width x Depth x Height) 

180g 

Input power specifications  DC 5V, 1.5V 

2.2W 

FCC/CE/C-tick ClassB 

Operating Temperature 

0°C to 40°C 

Operating Humidity 5~90% 

non-condensing