Accton Technology 24S Benutzerhandbuch

Stacking Hubs on a Flat Surface

2

Mounting Hubs in a Rack

2

Making a Connection via an MDI-X Station Port

2

Making a Connection via the MDI Daisy-Chain Port

3

Making a Connection to the BNC Port

3

Making a Connection to the AUI Port

3

Base Unit

4

Network Criteria

5

Diagnosing Hub Indicators

5

Power and Cooling Problems

6

Installation

6

RJ-45 Port Description

6

FCC Class A (USA)

6

Class A (Canada Department of Communications)

7

Class A (Taiwan Bureau of Commodity Inspection)

7

VCCI Class A Compliance (Japan)

7

CE Mark Declaration of Conformance for EMI and Safety (EEC)

7

Underwriters Laboratories Inc. (USA)

8

Wichtige Sicherheitshinweise (Germany)

8

The EtherHub-24s includes 24 RJ-45 ports,

1 BNC port for connection to thin Ethernet (10BASE2),

and 1 AUI port for connection to a variety of media types

including 10BASE5 or fiber (using a suitable transceiver).

With these options, you can easily link the hub to a thin or

thick Ethernet backbone, or connect to a remote office. The

hub also has an indicator panel that includes utilization

and link/traffic LEDs, making it easy to monitor the hub.

This guide contains all the information required to install and operate the hub.

The package includes:
· EtherHub-24s (Model No. EH2024)

· Four rubber foot pads

· BNC connector

· Rack mount bracket kit

· Quick Installation Guide

· AC power cord

· Owner registration card

This hub consists of 24 RJ-45 10Mbps ports, 1 BNC port, and 1 AUI port.  The

following figure shows the front and back panel of the hub:

This hub can be placed directly on your desktop, or mounted in a rack.
Before you start installing the hub, make sure you can provide the right

operating environment, including power requirements, sufficient physical

space, and proximity to other network devices that are to be connected.  Verify

the following installation requirements:
· Power requirements: 100 to 240 VAC (± 10%) at 50 to 60 Hz (± 3Hz).  The

hub's power supply automatically adjusts to the input voltage level.

· The hub should be located in a cool dry place, with at least 10 cm. (4 in.) of

space at the front and back for ventilation.

· Place the hub out of direct sunlight, and away from heat sources or areas

with a high amount of electromagnetic interference.

· If you intend to mount the hub in a rack, make sure you have all the

necessary mounting screws, brackets, bolts and nuts, and the right tools.

· Check if network cables and connectors needed for installation are available.