IBM Partner Pavilion BMD00082 Benutzerhandbuch
SmartConnect User’s Guide
108
Chapter 9: Switch Policies
BMD00082, February 2009
Add or Edit ACLs
This configuration window is used for modifying existing ACLs or defining new ACLs. This
window is reached from the
window is reached from the
window.
Access Control List
Use these fields to configure basic ACL parameters
Table 9-4
ACL Configuration Fields
Field
Description
ACL ID
Configures the ACL number.
Filter Action
Defines the filter action, as follows:
Permit
Deny
none
Ethernet Packet Format
Defines the Ethernet format for the ACL.
Tagging Packet Format
Defines the tagging format for the ACL.
IP Packet Format
Source MAC Address
Defines the source MAC address for this ACL.
Destination MAC address
Defines the destination MAC address for this ACL.
Ethernet Type
Defines the Ethernet type for this ACL.
VLAN ID
Defines a VLAN number and mask for this ACL.
Note: When this field is set, the ACL will match incoming packets only
when they are tagged. Untagged packets will not be matched.
Note: When this field is set, the ACL will match incoming packets only
when they are tagged. Untagged packets will not be matched.
802.1p Priority
Defines the 802.1p priority for the ACL.
Note: When this field is set, the ACL will match incoming packets only
when they are tagged. Untagged packets will not be matched.
Note: When this field is set, the ACL will match incoming packets only
when they are tagged. Untagged packets will not be matched.
Type of Service
Defines a Type of Service value for the ACL. For more information on
ToS, see RFC 1340 and 1349.
ToS, see RFC 1340 and 1349.
Protocol
Defines an IP protocol for the ACL. If defined, traffic from the specified
protocol matches this filter. Specify the protocol number. Some of the
well-known protocols include:
protocol matches this filter. Specify the protocol number. Some of the
well-known protocols include:
1:
ICMP
2:
IGMP
6:
TCP
17: UDP
89: OSPF
112: VRRP