IBM Partner Pavilion BMD00082 Benutzerhandbuch
SmartConnect User’s Guide
118
Chapter 10: System Settings
BMD00082, February 2009
Management Settings
Use this window to configure SNMP and System Log (syslog) settings.
SNMP
SmartConnect supports SNMP-based network management. If you are running a SNMP net-
work management station on your network, you can manage the SmartConnect using standard
SNMP MIBs.
work management station on your network, you can manage the SmartConnect using standard
SNMP MIBs.
System Log
VSE SmartConnect software uses system log files to transmit event messages and alerts across
management host.
management host.
See also:
Table 10-1
SNMP Management Fields
Field
Description
System Name
Defines the name for the system, up to 64 characters.
System Contact
Defines the name of the system contact, up to 64 characters.
System Location
Defines the name of the system location, up to 64 characters.
Read Community String
Defines the SNMP read community string, up to 32 characters.
The read community string controls SNMP “get” access to the Virtual
Switch Extension (VSE) for IBM BladeCenter, SmartConnect,.
The default read community string is public.
The read community string controls SNMP “get” access to the Virtual
Switch Extension (VSE) for IBM BladeCenter, SmartConnect,.
The default read community string is public.
Write Community String
Defines the SNMP write community string, up to 32 characters.
The write community string controls SNMP “set” and “get” access to
the Virtual Switch Extension (VSE) for IBM BladeCenter, SmartCon-
nect,. The default write community string is private.
The write community string controls SNMP “set” and “get” access to
the Virtual Switch Extension (VSE) for IBM BladeCenter, SmartCon-
nect,. The default write community string is private.
Table 10-2
Management Fields
Field
Description
IP Address
Configures the IP address of the syslog host.
Severity
Configures the severity level of the syslog host. The default is 7, which
means log all severity levels.
means log all severity levels.
Facility
Configures the facility level of the first syslog host displayed.
The default value is 0.
The default value is 0.