IBM Partner Pavilion BMD00082 Benutzerhandbuch

62  

„

  Chapter 5: Command Reference

BMD00082, February 2009

In addition to applying the configuration changes, you can save them to flash memory on the 

switch

.

If you do not save the changes, they will be lost the next time the system is rebooted.

To save the new configuration, enter the following command at any CLI prompt:

When you save configuration changes, the changes are saved to the active configuration block. 
The configuration being replaced by the save is first copied to the backup configuration block. 
If you do not want the previous configuration block copied to the backup configuration block, 
enter the following instead:

You can decide which configuration you want to run the next time you reset the switch. Your 
options include:

„

The active configuration block

„

The backup configuration block

„

Factory default configuration

When resetting the switch to its factory default configuration, the switch will retain its 

stacking settings. To reconfigure or disable stacking, see 

You can view all pending configuration changes that have been applied but not saved to flash 
memory using the diff flash command. It is a global command that can be executed from 
any menu.

# 

#