Intel 500 Benutzerhandbuch
696946.bok : 94602 6 Tue Apr 21 14:27:26 1998
C H A P T E R 2 Stack Interface Module
6
Installing the module
To install the module, follow the instructions in chapter 1.
Connecting the Modules
Use the Stacking Cable
The Stacking Cable is one meter (39 inches) long and connects two
Stack Interface Modules (each inserted in an Intel Express 500 Series
Switch).
Stack Interface Modules (each inserted in an Intel Express 500 Series
Switch).
Connecting and
disconnecting the cable
disconnecting the cable
The cable has a clip-on connector. To connect the cable, push it firm-
ly onto the module’s port. To disconnect the cable, use your thumb
and forefinger to squeeze the latches (on the connector) together and
pull the connector away from the port.
ly onto the module’s port. To disconnect the cable, use your thumb
and forefinger to squeeze the latches (on the connector) together and
pull the connector away from the port.
Understanding the LEDs
After you have connected the modules and powered the switches on,
each module has two LED indicators: green and orange These indi-
cate the following:
each module has two LED indicators: green and orange These indi-
cate the following:
Configuring the switches
After you have used the cable to connect the Stack Interface Modules,
you can still configure each of the switches separately.
you can still configure each of the switches separately.
Green
Orange
Indicates
Off
Off
Port enabled, no link.
Blinking
Off
Link and data traffic.
Solid
Off
Link.
Off
Solid
Port disabled by management.
Solid
Solid
Port disabled by a fault.