Intel 460T Benutzerhandbuch

59

C

H

A

P

T

E

R

5

Configure ports: Press the 

z to select a range of ports to configure.

State: Press the 

z to toggle the field and disable or enable ports.

Speed/Duplex: Press the 

z to toggle the field options and change the

speed and duplex of the port. You can set the port to auto-negotiate speed,
or to 10 Mbps or 100 Mbps at half-duplex or full-duplex.

Flow Ctrl (Control): Press the 

z to enable or disable flow control.

Priority: Press the 

z to change the settings. The <Frame> setting

reads the packet’s 802.1p priority tag and handles it accordingly. The
<Low> and <High > settings force the packet into one of two priority
queues. Forcing a packet into a queue does not retag the packet.

Link: Indicates the port’s current link status:

--: Indicates there is no device link or the port is disabled.

10M/100M: Indicates the port’s speed, either 10 Mbps or 100 Mbps.

Full/Half: Indicates a device is connected at full-duplex or half-duplex.

IEEE/BackP: Indicates the type of flow control, either IEEE PAUSE
frames or backpressure.

Partitioned: Indicates port was disabled due to a partition error.

Source mirror/Target mirror: Indicates the port being mirrored and
where the data is being sent.

Main Menu

Configure Device

Port Settings