Intel 470 Benutzerhandbuch
53
Using Local Management
C
H
A
P
T
E
R
5
Local Management
Configure Device
Description
IP settings: Configures the switch’s IP address, subnet mask, and default
gateway, or enables BOOTP.
gateway, or enables BOOTP.
Port settings: Enables and disables ports, configures port speed, duplex,
flow control, and priority.
flow control, and priority.
GBIC port settings (470T only): Enables and disables ports, configures
port speed, duplex, flow control, and priority.
port speed, duplex, flow control, and priority.
Priority tagging: Sets priority values for traffic based on source or
destination MAC addresses.
destination MAC addresses.
Switch settings: Sets switch identification, location, and contact
information, and configures some advanced switch settings.
information, and configures some advanced switch settings.
Spanning Tree Protocol: Configures spanning tree for the entire switch or
individual ports.
individual ports.
Forwarding and filtering: Adds or removes entries, locks the switch’s
address table, enables IGMP snooping, and sets filters for specific MAC
addresses.
address table, enables IGMP snooping, and sets filters for specific MAC
addresses.
Port mirroring: Sends a copy of data from one port to another for
monitoring and troubleshooting purposes.
monitoring and troubleshooting purposes.
Link aggregation: Combines ports on the switch to increase bandwidth.
Broadcast storm control: Configures ports to drop excessive broadcast
traffic before it floods the network.
traffic before it floods the network.
LOCATION
Main Menu
Configure Device