D-Link DES-1016D Benutzerhandbuch
10/100 NWay Ethernet/Fast Ethernet Switch User’s Guide
Unpacking and Setup
7
LED Indicators
After the switch is turned on, the LED indicators should respond
as follows:
as follows:
♦
All of the LED indicators will blink momentarily. This
blinking of the LED indicators represents a reset of the
system.
blinking of the LED indicators represents a reset of the
system.
♦
The power LED indicator will remain ON.
Power Failure
As a precaution, the Switch should be turned OFF in case of a
power failure. Press the power switch to the off or “0” position.
When power is resumed, turn the Switch ON. At all times, avoid
leaving the Switch ON if a power failure is anticipated.
power failure. Press the power switch to the off or “0” position.
When power is resumed, turn the Switch ON. At all times, avoid
leaving the Switch ON if a power failure is anticipated.