DELL 9.8(0.0) Benutzerhandbuch
Parameters
vlan-id
Enter the VLAN ID. The range is from 1 to 4094.
layer2_priority
Enter the Layer 2 priority. The range is from 0 to 7.
DSCP_value
Enter the DSCP value. The range is from 0 to 63.
priority-tagged
number
number
Enter the keywords priority-tagged then the Layer 2
priority. The range is from 0 to 7.
priority. The range is from 0 to 7.
Defaults
unconfigured.
Command
Modes
Modes
CONFIGURATION (conf-lldp)
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series and E-Series.
Related
Commands
Commands
— debugs LLDP.
— displays the LLDP neighbors.
advertise med location-identification
To advertise a location identifier, configure the system.
S4820T
Syntax
advertise med location-identification {coordinate-based value |
civic-based value | ecs-elin value}
To return to the default, use the no advertise med location-
identification {coordinate-based value | civic-based value |
ecs-elin value} command.
civic-based value | ecs-elin value}
To return to the default, use the no advertise med location-
identification {coordinate-based value | civic-based value |
ecs-elin value} command.
1162
Link Layer Discovery Protocol (LLDP)