Q-Logic SN0135524-00 Benutzerhandbuch
QL
OGIC
S
WITCH
I
NTEROPERABILITY
G
UIDE
P
AGE
3
V
ERSION
1.0, M
ARCH
2003
Supported Switches and Firmware Versions
The following QLogic switches have been tested in the QLogic environment and comply with the
FC-SW-2 standard.
FC-SW-2 standard.
The QLogic switches have been tested interoperable with the following switches from Brocade,
Cisco, IBM, INRANGE, McDATA, and Sun that comply with the FC-SW-2 standard. See the
referenced page for detailed instructions on merging QLogic fabrics and these fabrics.
Cisco, IBM, INRANGE, McDATA, and Sun that comply with the FC-SW-2 standard. See the
referenced page for detailed instructions on merging QLogic fabrics and these fabrics.
QLogic Supported Switch and Firmware Versions
Switch Model
Firmware Version
SANbox2-8 Switch
1.3.x and above
SANbox2-16 Switch
1.3.x and above
SANbox2-64 Switch
1.5.x and above
Brocade, Cisco, IBM, INRANGE, McDATA, and Sun
Supported Switch and Firmware Versions
Manufacturer
Switch Model
Firmware Version
Brocade
SilkWorm 3200 Switch
3.0.2g and above
SilkWorm 3800 Switch
3.0.2g and above
SilkWorm 3900 Switch
4.0.2c and above
SilkWorm 12000 Switch
4.0.2c and above
Cisco
SN 5428 Storage Router
2.3.1-k9 or above
MDS 9216 Switch
1.0(1) [build 1.0(0.281)]
MDS 9509 Director
1.0(1) [build 1.0(0.281)]
IBM
IBM eServer BladeCenter Fibre Channel
Switch Module
Switch Module
1.4.0.35.00 or above
INRANGE
FC/9000 Switch
Code set 3.0.3.2 or above
Sphereon 4500 Switch
04.01.00 12 and above
Intrepid 6064 Director
04.01.02.4 and above
Intrepid 6140 Director
04.01.02.4 and above
Sun
Sun StorEdge Network 2 Gb FC Switch-8
1.3.x and above
Sun StorEdge Network 2 Gb FC Switch-16 1.3.x and above